Dein Warenkorb ist leer

Skip Frye’s thruster set, and small for a thruster on purpose: less fin, so the board’s rail line does the work.The Frye Tri is a classic from Skip’s archives.
Skip Fryes Thruster-Set, und für einen Thruster absichtlich klein: weniger Finne, damit die Rail-Linie des Boards die Arbeit macht.
Der Frye Tri ist ein Klassiker aus Skips Archiv. Die beiden vorderen Finnen sind in Tiefe und Basis etwas größer als der Trailer, was Fehlerverzeihung bringt, ohne Kontrolle aufzugeben; alle drei sind für ein Tri-Set kompakt, und genau das ist Skips Ansatz – weniger Finne und mehr Board nutzen.
Wie sich das anfühlt
Kleine Finnen mit sanftem Rake und ausgewogenem Profil lösen früh und wechseln die Richtung ohne Kraftaufwand. Was du aufgibst, ist der fest verankerte Halt eines größeren Sets in kräftigem Surf; was du bekommst, sind der Glide und die weichen, gezogenen Turns, für die Skips Boards bekannt sind.
Für wen es passt
Eggs, Glider und jedes Board, das um lange Rail-Linien herum geshapet ist, in Wellen, in denen Flow mehr zählt als Power. Ist dein Board ein 2+1 statt ein Drei-Plug-Thruster, kombiniere stattdessen eine Skip Frye Single mit den Skip Frye Side Bites.
Spezifikationen
Konfiguration
Thruster – drei Finnen
Finnensystem
Futures-kompatibel
Konstruktion
Massives Fiberglas
Vordere Finnen
4.39" tief, 4.37" Basis, 14.30 sq in
Hintere Finne
4.21" tief, 4.03" Basis, 13.00 sq in
Farben
Smoke
Designer
Skip Frye
Hergestellt von
True Ames, Santa Barbara, Kalifornien
Wenn es nicht dieses ist
Ein Thruster mit mehr Halt für größere Wellen? Der CI Tri Large oder der Power Trailer Tri. Das Frye-Gefühl auf einer Single Fin? Die Skip Frye Single, in massivem Glas oder Volan.
All three fins are cut on the small side for a thruster setup, which stays true to Skip's overall philosophy of generally needing less fin while using more of the board's rail-line, with a gentle amount of rake for silky smooth turning ability and effortless directional changes.
Run this set on a Frye-style hybrid or fuller egg set up as a thruster when flow and clean trim matter more than vertical snap — it's for drawing speed lines on open faces, not darting off the tail. If you want a quicker, more aggressive thruster feel, the TA Tri is the snappier call.
The Skip Frye Tri is a three-fin thruster set in solid fiberglass with Futures bases, made by True Ames and sold as a complete set. All three fins are cut on the small side for a thruster setup with a gentle amount of rake, and the front fins are slightly larger than the trailer. It is intended for fuller eggs, hybrids, and Frye-style boards set up as thrusters.
Mentioned in the review — True Ames TA Tri · Skip Frye Single — not something we carry.