Single Fins
One fin. Infinite trim.
Noseriders(18)
High-area, raked fins built for tip time — hang ten with confidence.
Pivot & Performance(7)
Upright templates that let you pivot off the tail and redirect quickly.
Smooth Trimmers(16)
Balanced fins that hold a clean line down the wave — set it and forget it.
Carving Fins(10)
Moderate rake with drive — draw smooth arcs from rail to rail.
Classic Cruisers(7)
Flexy, forgiving fins for mellow glide and relaxed flow.
All-Arounders(26)
No single trait dominates — versatile fins that do a bit of everything.
How single fins work
A single fin is the only point of contact between your board and the water's lateral forces. That simplicity is the whole point — there's nothing to interfere with the glide, nothing creating drag except the fin itself. Every design tradeoff matters more when there's only one fin doing the work.
Rake (sweep) determines how the fin turns. Upright pivot fins with low rake pivot quickly off the tail — wide and deep, they act as an anchor keeping the tail down while you walk the nose. Raked fins with more sweep draw longer, arcing turns and hold better at speed. Flex adds another dimension: the Greenough 4A's flexible tip is its signature, storing energy through turns and releasing it on exit — what surfers describe as "squirt."
The base length controls drive (forward projection), the height controls hold (resistance to sliding out), and the foil shape controls how water flows across the fin's surfaces. Flat-foil fins are looser and more responsive. 50/50 foils are more stable and forgiving. As one Swaylocks veteran puts it: "a fin with moderate flex and a good amount of fin base will serve best" for balanced control.
Unsere Auswahl
5 Finnen, die wir empfehlen. Scrollen zum Entdecken.
Greenough 4A
The most versatile single fin ever made.
Medium profile with a full base and moderately flexible tip. Holds when you need it, releases when the time is right. If you're buying one single fin, this is the safe bet — it works on everything from a 6'6" egg to a 10' log.
- +First single fin — works on any board
- +Surfers who want one fin that does everything
- +Any single-fin board from 6'6" to 10'+
Skip Frye
San Diego's most revered template. Pivot and walk.
Skip Frye designed this fin for his own boards — upright, moderate area, with a pivot-friendly shape that lets you walk the board and still have control off the tail. Understated and timeless, like everything Skip makes.
- +Traditional longboarders who walk the board
- +Pivot turns and smooth rail work
- +Performance logs and classic shapes
Tyler Warren Flux
Modern performance single. Flex meets drive.
Tyler Warren's approach to single fins borrows from his experience shaping twin fins and mid-lengths. The Flux has a moderate rake with a responsive flex pattern — it drives through turns without the stiffness of a traditional fiberglass fin. Works especially well on mid-lengths and modern shapes.
- +Modern mid-length and alternative shapes
- +Surfers who want performance without a thruster
- +Down-the-line speed with responsive turning
Hobie DP Flex
Hobie Alter's high-flex design in hand-laid volan.
Designed by the man who brought surfing to the mainstream. The DP Flex has an unusually high flex rating — the tip bends noticeably through turns, storing energy and releasing it on exit. Volan construction adds warmth. A fin for surfers who feel the board, not just ride it.
- +Surfers who prioritize feel and flow
- +Classic longboards and gliders
- +Mellow, drawn-out turns in small to medium surf
Lovelace Thick Lizzy
Ryan Lovelace's daily driver. Drive and projection.
Ryan Lovelace shaped this for his own quiver — reliable drive, hold, and projection across conditions. Thicker foil provides stability while the moderate rake keeps turns flowing. One of the few modern designer fins that works equally well on a hull and a log.
- +All-conditions reliability
- +Hull riders and alternative-craft surfers
- +Surfers who want drive without stiffness
Die Designer
Studied the caudal fins of bluefin tuna, the wings of birds, and decades of wave riding to replace the heavy D-fins of the 1960s. In 1966, his fin design directly influenced Nat Young's world championship victory. His film The Innermost Limits of Pure Fun (1970) inspired the shortboard revolution. The 4A template, produced by True Ames since 1979, remains the most popular single fin in the world after 40+ years.
San Diego legend who has shaped boards for over 60 years. His fins are extensions of his boards — functional, understated, and built for the way he surfs. No logos, no hype. Just trim.
Modern renaissance shaper who moves between single fins, twins, and mid-lengths with equal fluency. His fin designs pull from years of testing on his own shapes — form follows the board, not the trend.
Greenough Power Blade
How a 1960 V-slot experiment became the most advanced single fin ever made.
Read the article ›Greenough Power Glide 45
Same twist-fin DNA as the Power Blade — built for a wider range of boards and surfers.
Read the article ›Power Blade vs 4A
Two Greenough designs, two completely different surfers. Here's how to know which one you need.
Read the article ›Noch unsicher?
Die volle Single Fins-Auswahl gibt es in der 4051 Judah St im Outer Sunset. Bringen Sie Ihr Board mit.
Get in touch ›116 single fins for longboards, mid-lengths, and single-fin shortboards. Pivot fins, raked fins, flex fins, and speed fins from True Ames, Gato Heroi, Wild Things Gallery, and DRD4. Templates by George Greenough, Ryan Lovelace, Tyler Warren, and Skip Frye. Fiberglass, volan, and solid glass constructions in sizes from 6 inches to 10.5 inches.