Tu carrito está vacío

Jordan Brazie’s Valaric canards, FCS compatible solid fiberglass in black — the lead fins for the Valaric twinzer, sold as a pair.A twinzer runs four fins, but not as a quad: each main fin gets a small canard set just ahead of and outside it.
Los canards Valaric de Jordan Brazie, en fibra de vidrio maciza compatible con FCS y color negro: las quillas delanteras del twinzer Valaric, vendidas por pares.
Un twinzer usa cuatro quillas, pero no como un quad: cada quilla principal lleva un pequeño canard justo delante y por fuera de ella. El canard genera un vórtice sobre la quilla principal, lo que le permite agarrar con un ángulo más cerrado del que podría de otro modo. Los canards se venden por pares; las quillas traseras van aparte o en los sets twinzer.
Esta plantilla
Brazie los dibuja pequeños y muy pegados, de modo que el set se comporta como un twin la mayor parte del tiempo y solo muestra el agarre de los canards cuando la pared se empina. Tres ángulos de cant: 0° para la mínima influencia, 4° como elección habitual, 9° cuando quieres que el canard trabaje al máximo.
Especificaciones
Configuración
Canards, par
Sistema de quillas
Compatible con FCS
Construcción
Fibra de vidrio maciza, foil interior plano
Altura
2.74"
Base
2.64"
Área
5.26 sq in
Cant
0°, 4° o 9°
Color
Negro
Diseñador
Jordan Brazie (Valaric Surfboards)
Fabricados por
True Ames, Santa Bárbara, California
The flat inside foil and small area add control and lift without dragging like a full side bite -- the looseness and feel of a two-fin setup with the maneuverability a plain twin can lack.
Buy these only for a Twinzer board, ideally paired with the Libra Twin they were designed around, and start at the middle angle setting before tuning. If you don't have canard boxes, or you want a complete matched four-fin set out of the box, these are the wrong purchase.
The Valaric Canards are the small front fins from Jordan Brazie's Valaric Twinzer system, foiled by True Ames in FCS-compatible, single-tab solid fiberglass. They run a flat inside foil with selectable 0, 4, and 9 degree angle options and mount forward of and outside a rear twin. Brazie designed them to expand on the Libra Twin, the rear hybrid twin from the same collection; they are not standalone fins.
Mentioned in the review — Libra Twin · TA Twinzer — not something we carry.