Tu carrito está vacío

Wayne Rich's trailer fin, FCS compatible solid fiberglass, in smoke or red.
La quilla trailer de Wayne Rich, fibra de vidrio sólida compatible con FCS, en smoke o rojo.
Un trailer es la quilla pequeña que convierte una twin en un 2+1, o que añade un poco de agarre en la cola a una single fin. No está ahí para llevar la dirección; está ahí para que la cola no se te vaya más de lo que le has pedido.
Esta en concreto
El trailer de Rich es pequeño y con mucho rake hacia atrás: asienta la cola de una twin por la mitad del giro sin añadir la rigidez en línea recta que sí añade un trailer más alto.
Especificaciones
Configuración
Quilla única
Sistema de quillas
Compatible con FCS
Construcción
Fibra de Vidrio Sólida
Base
2.96"
Profundidad
2.58"
Colores
smoke, rojo
Diseñador
Wayne Rich
Fabricadas por
True Ames, Santa Barbara CA
Dropping it in adds tail hold without converting the board into a thruster, keeping most of the twin character intact.
Buy it if you ride a twin with a trailer box and the tail lets go in punchier surf: it plants the tail while keeping most of the twin's drift and speed, and pairs naturally with the Wayne Rich Twins. Without a trailer box, or if you really want a full thruster, this is not the fin.
The Wayne Rich Trailer is a small center trailer fin designed by shaper Wayne Rich and foiled by True Ames in FCS-compatible solid fiberglass. It is a low, small template in the nubster style that mounts in a trailer box at the centerline behind a twin pair. Rich designed it to pair with his own twin and keel sets, including the Wayne Rich Twins.
The twin set this trailer was designed to slot behind for the matched setup.
Mentioned as another loose twin set the trailer can tighten up.
A full thruster set is the different direction if you want a bigger jump toward three-fin feel.
