Tu carrito está vacío

The Wayne Rich Power Tilt is our newest go-to recommendation for many 2+1 setups.
La Wayne Rich Power Tilt es nuestra recomendación de referencia más reciente para muchos montajes 2+1. Con una plantilla de tamaño más bien medio en cuanto a área, la Power Tilt tiene un buen equilibrio entre ancho de base para dar estabilidad, una zona media ligeramente vertical para dar control, y también una cantidad moderada de rake hacia la punta que ayuda a aprovechar la potencia en los giros. La fiabilidad y la capacidad de respuesta son elementos clave aquí, y esta quilla es muy versátil en un rango amplio de condiciones y de tablas distintas. La Power Tilt es una gran opción para longboards de alto rendimiento, mid-lengths y también para tablas alternativas más cortas. Siempre es un placer trabajar con el Sensei Wayno: tiene buen ojo, muchísimo conocimiento y una afinidad especial para crear diseños que funcionan excepcionalmente bien. Estamos orgullosos de ofrecer productos de calidad junto a WR, y no tenemos ninguna duda de que vas a poder sacarle partido a esta quilla. Flex mínimo y foil completo para máxima potencia Construcción en fibra de vidrio sólida, acabado en crudo Nuestra opción 2+1 favorita en todas las condiciones Cuatro tallas distintas para combinar con tus side bites favoritas: o con nuestras Wayne Rich Side Bites recomendadas
The newest go-to recommendation for many 2+1 setups: a nice balance of base width for stability, a slightly upright mid-section for control, and a moderate amount of rake through the tip which helps harness power through turns, with the smaller and medium sizes favorites for 2+1s in solid surf.
This is the dependable anchor for a 2+1 high-performance longboard or mid-length when the waves get serious — paired with side bites it holds the rail on late drops and steep sections while the moderate tip rake still lets you drive through the turn. If you want more raw drive and projection from the center instead, run the Wayne Rich Power in its small 2+1 sizes.
The Power Tilt is a 2+1 center fin designed by Wayne Rich and made by True Ames in solid fiberglass with a full foil and minimal flex. The template combines a workable base width, a slightly upright mid-section, and a moderate amount of tip rake. It is stocked in center-fin sizes of 6", 6.5", 7", and 7.5" for the center boxes of high-performance longboards, mid-lengths, and alternative shorter boards.
