Tu carrito está vacío

Wayne Rich 3.4" side bite pair in solid fiberglass, FCS-compatible — the small outside fins that turn a single-fin board into a 2+1.
Un par de side bites Wayne Rich de 3.4" en fibra de vidrio sólida, compatibles con FCS: las quillas exteriores pequeñas que convierten una tabla de single fin en un 2+1.
Las side bites convierten una tabla de single fin en un 2+1: la quilla central sigue llevando la dirección, y las dos quillas pequeñas añaden agarre en el giro y drive desde el bottom. A cambio pierdes parte de ese tacto suelto y de pivote que tiene una single fin por sí sola, y por eso la medida es la decisión de verdad.
Esta medida
Con 3.4" son una side bite pequeña: lo justo para asentar la cola sin comprometer la tabla a un tacto de thruster.
Construcción
La fibra de vidrio sólida es la más rígida y pesada de las dos construcciones: menos flex, más drive directo.
La plantilla
Rich dibuja una side bite con más rake que la plantilla de la casa, lo que cambia un poco de la mordida inmediata por un arco más largo y más suave.
Especificaciones
Configuración
Side bites — par
Sistema de quillas
Compatible con FCS
Construcción
Fibra de Vidrio Sólida
Base
3.54"
Profundidad
3.44"
Colores
smoke, rojo
Diseñador
Wayne Rich
Fabricadas por
True Ames, Santa Barbara CA
Slightly more upright than a standard side bite, with a thinner tip and relief through the trailing edge that keeps the turn precise rather than draggy -- the smaller area makes this the looser pick for lighter riders and smaller boards.
The looser side of a performance 2+1: rail grip and lift for smaller riders and smaller boards, run with a dropped-down center fin and matched naturally to the Power Tilt center. Bigger riders or bigger waves want the 4.0" version's harder lock-in instead.
The Wayne Rich Side Bites 3.4" are an FCS-compatible pair in solid fiberglass, designed by Wayne Rich to complement his Power Tilt center fin in a 2+1 setup, though they work with most center skegs. The template runs slightly more upright than a standard side bite, with a thinner tip and relief through the trailing edge. True Ames also offers the template in a larger 4.0" size and in a Futures-compatible version. The 3.4" size is intended for smaller riders and smaller boards.
