Dein Warenkorb ist leer

Derrick Disney's RDM Twinzer — a four-fin set of two raked rears with a small canard ahead of each, drawn as his primary set-up for the Midzr, Roe and Egg.Sold as a set of four in solid fiberglass, in ivory, on bases that take FCS or Futures.
Derrick Disneys RDM Twinzer – ein Vier-Finnen-Set aus zwei gerakten hinteren Finnen mit je einem kleinen Canard davor, gezeichnet als sein Haupt-Setup für Midzr, Roe und Egg.
Verkauft als Viererset aus Solid Fiberglass, in Ivory, auf Bases für FCS oder Futures. Die hinteren Finnen sind kräftig: eine breite Base, die in eine vollere Drop Tip übergeht, 70/30 gefoilt. Vor jeder sitzt ein flach gehaltener, doppelt gefoilter Canard mit breiter Base und Kurven, die von einem Gephart 2 Keel geborgt sind. Die Canards gibt es in mehreren Winkeln, sodass sich das Paar auf die rund 13° Cant einstellen lässt, um die herum die RDM-Formel gebaut ist.
Was das bedeutet
Ein Twinzer leitet die Strömung der kleinen vorderen Finne auf die größere dahinter, wodurch die hintere mehr Rake tragen kann, als sie es sonst könnte, ohne mit Widerstand dafür zu bezahlen. Die hintere Finne gibt also den Drive, während der Canard sie versorgt und beruhigt, und das Board kommt weich herum statt scharf zu pivotieren. Der Cant leistet hier echte Arbeit: Der für den Canard gewählte Winkel bestimmt, wie stark sich das Paar auflädt, wenn das Board auf das Rail geht.
Für wen es passt
Boards, die für einen Twinzer gebohrt sind – zuallererst Derrick Disneys Modelle Midzr, Roe und Egg, und allgemein Eggs und Mid-Lengths, die für vier Plugs ausgelegt sind. Surfer, denen gefällt, was ein Twin down the line macht, die aber mehr Geschmeidigkeit und mehr Drive durch den Turn wollen, als zwei Finnen allein ihnen geben.
Spezifikationen
Konfiguration
Twinzer – Set aus 4 Finnen (zwei hintere Finnen, zwei Canards)
Finnensystem
FCS oder Futures kompatibel
Konstruktion
Solid Fiberglass
Hintere Finnen
Höhe 5.18" / 132 mm, Base 5.43" / 138 mm, Fläche 21.64 sq in / 139.61 cm²
Canard-Finnen
Höhe 2.53" / 64 mm, Base 3.15" / 80 mm, Fläche 6.50 sq in / 41.94 cm²
Foil
Hinten 70/30, Canards doppelt gefoilt
Cant
Canard-Finnen 0°, 4° oder 9° – wähle beim Checkout; hintere Finnen 5.0°
Farben
Ivory
Designer
Derrick Disney
Gefertigt von
True Ames, Santa Barbara CA
The double-foiled canard is shaped with curves he likens to a Gephart 2 keel, working with the rear fin's rake and foil to smooth out the turn.
Effortless drive and smoothness through turns — stout, wide-base rear twins with a fuller drop tip, built around Disney's Midzr, Roe and Egg models.
Run the full RDM set on a fuller-outlined twinzer egg or mid-length with matching canard boxes — it drives and holds through turns for surfers drawing lines and leaning into rail rather than flicking the tail. If you want a snappier twinzer for a shorter board, the DST Twinzer is the move, and if you want traditional keel-twin drive without canards, go Gephart 70/30 Keels.
Derrick Disney's primary twinzer set, manufactured by True Ames in solid fiberglass with FCS- and Futures-compatible bases. The set pairs two wide-base rear twins, whose foil runs into a fuller drop tip, with a low-profile double-foiled canard set at a fixed cant; the canard is offered in multiple angles. It was designed around Disney's fuller-outlined Midzr, Roe and Egg board models and is meant for boards with matching canard boxes.
Mentioned in the review — Derrick Disney DST Twinzer · Gephart 70/30 Keels · Gephart 2 Keels — not something we carry.