Dein Warenkorb ist leer

Josh Farberow's pro model of the Farb Flex — a Volan longboard fin with more base and more rake, for noseriding that does not give up the turn.Volan fiberglass, in 9.0", 9.5" and 10.0".
Josh Farberows Pro-Modell der Farb Flex – eine Volan-Longboard-Finne mit mehr Basis und mehr Rake, fürs Noseriding, das den Turn nicht aufgibt.
Volan-Fiberglas, in 9.0", 9.5" und 10.0". Farberow hat die Konstruktionsmerkmale der ursprünglichen Farb Flex beibehalten und dabei die Basis verbreitert und den Rake vergrößert, für mehr Drive aus dem Bottom Turn und mehr Stabilität auf der Nose. Das Foil an der Spitze wurde ausgedünnt, um Flex hinzuzufügen, und die Volan-Platte fügt noch einmal mehr davon hinzu: so laminiert und ausgerichtet, dass das Gewebe in die richtige Richtung läuft, sodass die Finne sich durch ihren Körper biegt statt nur an der Spitze. Speed und Projektion aus dem Bottom Turn heraus und durch die Turns.
Wie sich das anfühlt
Eine breite Basis ist Drive – sie hält die Linie durch den Bottom Turn und schiebt weiter, statt auszubrechen –, und Rake dehnt diesen Turn zu einem Bogen statt zu einem Pivot. Der Flex ist die Stelle, an der das Modell seinen Namen verdient: Belaste sie, und sie gibt nach, dann reicht sie die Energie als Projektion die Linie hinunter zurück. Unter der Nose sind Basis und Rake zusammen das, was verhindert, dass das Tail loslässt, während das Gewicht vorn liegt.
Für wen es passt
Longboards, die in beide Richtungen gefahren werden – nach vorn auf die Nose gelaufen und über das Tail gedreht –, von Surfern, die eine Finne wollen, die auf Druck antwortet, statt steif unter ihnen zu sitzen. Wer einen rein festgenagelten Noserider sucht, sollte sich ein aufrechtes Pivot-Template ansehen; diese hier tauscht bewusst etwas von diesem Halt gegen Drive.
Spezifikationen
Konfiguration
Single Fin
Finnensystem
Single- / Longboard-Box
Konstruktion
Volan-Fiberglas
Größen
9.0", 9.5", 10.0"
Foil
50/50
Designer
Josh Farberow
Hergestellt von
True Ames, Santa Barbara, Kalifornien
The template keeps the beloved Farb Flex character but adds base width and rake for more drive off the bottom and more stability on the nose, with the flex coming through the body so it projects you out of turns rather than just wobbling at the tip.
A do-it-all longboard fin with Volan spring: on a performance or all-around log it noserides and genuinely turns. If your only goal is maximum dead-planted tip time, the Heritage is steadier, and the Hobie Log Flex is the more traditional Volan log fin with less turning emphasis.
The Josh Farberow Pro Model is a Volan-glass longboard single fin made by True Ames, developed from the Farberow Flex template with added base width and rake and a thinned tip foil. The Volan layup is built so flex comes through the body of the fin. It comes in three sizes — 9.0", 9.5", and 10.0" — and is intended for performance and all-around longboards.
Mentioned in the review — Heritage · Hobie Log Flex · Farberow Flex — not something we carry.