Il carrello è vuoto

The Campbell Brothers’ upright twin, drawn to go with their A/O twin board — solid fiberglass, Futures compatible.A modern reading of the traditional upright twin: 5.62" deep on a 5.13" base, 22.07 sq in of area, with a full body and a full tip and a flat foil.
Il twin verticale dei Campbell Brothers, disegnato per andare con la loro tavola twin A/O: fibra di vetro piena, compatibile Futures.
Una lettura moderna del twin verticale tradizionale: 5.62" di altezza su una base da 5.13", 22.07 sq in di area, con corpo pieno, punta piena e foil piatto. Malcolm Campbell l'ha disegnato e messo a punto; Jacob Campbell ha fatto i test.
Come si sente
È l'altezza a tenere la coda su una parete ripida, e a 5.62" questo è un twin alto. Portare l'area fino in punta fa sì che quella tenuta lavori anche nella parte alta della curva e non solo in basso, così la pinna dà drive deciso in uscita dal bottom e non scappa quando l'onda si alza. L'outline verticale è quello che la tiene rapida: i cambi da rail a rail restano corti anche con tutta questa pinna in acqua.
A chi è adatto
Tavole twin fin performance in condizioni solide, surfate da chi vuole impegnarsi su una linea di rail invece di scivolare in giro. Nelle onde deboli è più pinna di quanta l'onda riesca a caricare.
Specifiche
Configurazione
Twin — coppia
Sistema pinne
Compatibile Futures
Costruzione
Fibra di vetro piena
Altezza
5.62" / 143 mm
Base
5.13" / 130 mm
Area
22.07 sq in / 129.48 cm²
Foil
Piatto
Colori
Rosso, blu, smoke
Designer
Malcolm Campbell e Duncan Campbell
Prodotte da
True Ames, Santa Barbara, California
Se non è questo quello giusto
Surfi una Bonzer invece di un twin? I Bonzer Runners (4) - FCS Compatible (Solid Fiberglass), o la Bonzer Side Bite 2.75" Fiberglass (FCS) per il set più piccolo.
A melding of the late-70s upright twin and the present-day Bonzer center fin — the full body and tip give it substantial drive, while the upright outline keeps the board quick edge to edge, a rare mix of speed, drive, and release.
Run the Alpha Omega on a performance twin when you want speed, drive, and looseness in balance from an upright template — it's the do-it-all upright twin. If you want planted keel drive and trim, the Beamish is the fit; if you want maximum loose release, the 'I'iwi.
The Alpha Omega Twin is an upright twin-fin template designed by Malcolm Campbell with testing by Jacob Campbell, made by True Ames in Futures-compatible solid fiberglass. The design draws on the fast, flowing twins of the 1970s with a refined balance of base, depth, rake, and foil, carrying a full body and tip. It runs as a standalone twin set on twin-fin boards and performance twin hulls, not as part of a Bonzer cluster.
Mentioned in the review — Beamish Twin · Barrett Miller 'I'iwi Twin — not something we carry.