Il carrello è vuoto

Derrick Disney's RDM Twinzer — a four-fin set of two raked rears with a small canard ahead of each, drawn as his primary set-up for the Midzr, Roe and Egg.Sold as a set of four in solid fiberglass, in ivory, on bases that take FCS or Futures.
La RDM Twinzer di Derrick Disney — un set da quattro pinne, due posteriori con rake e una piccola canard davanti a ciascuna, disegnato come il suo assetto principale per i modelli Midzr, Roe ed Egg.
Venduta come set da quattro in fibra di vetro piena, in avorio, su basi che accettano FCS o Futures. Le posteriori sono tozze: una base larga che passa in una punta più piena e cadente, con foil 70/30. Davanti a ciascuna c'è una canard a basso profilo con doppio foil, base larga e curve prese in prestito da una keel Gephart 2. Le canard sono disponibili in diversi angoli, così la coppia può essere impostata sui circa 13° di cant su cui è costruita la formula RDM.
Come si sente
Un twinzer convoglia il flusso della piccola pinna anteriore sulla pinna più grande dietro, il che permette alla posteriore di avere più rake di quanto potrebbe altrimenti senza pagarlo in resistenza. Così la posteriore fa il drive mentre la canard la tiene alimentata e stabile, e la tavola gira in modo fluido invece di perniare di scatto. Il cant qui lavora davvero: l'angolo scelto per la canard decide quanto la coppia si carica quando la tavola va sul rail.
A chi è adatto
Tavole forate per twinzer — i modelli Midzr, Roe ed Egg di Derrick Disney prima di tutto, e in generale egg e mid-length tagliati per quattro box. Chi ama quello che fa una twin lungo l'onda ma vuole più morbidezza e più drive in curva di quanto gli diano due pinne da sole.
Specifiche
Configurazione
Twinzer — set da 4 pinne (due pinne posteriori, due canard)
Sistema pinne
Compatibile FCS o Futures
Costruzione
Fibra di vetro piena
Pinne posteriori
Altezza 5.18" / 132 mm, base 5.43" / 138 mm, area 21.64 sq in / 139.61 cm²
Canard
Altezza 2.53" / 64 mm, base 3.15" / 80 mm, area 6.50 sq in / 41.94 cm²
Foil
Posteriori 70/30, canard doppio foil
Cant
Canard 0°, 4° o 9° — scegli alla cassa; pinne posteriori 5.0°
Colori
avorio
Designer
Derrick Disney
Prodotto da
True Ames, Santa Barbara, California
The double-foiled canard is shaped with curves he likens to a Gephart 2 keel, working with the rear fin's rake and foil to smooth out the turn.
Effortless drive and smoothness through turns — stout, wide-base rear twins with a fuller drop tip, built around Disney's Midzr, Roe and Egg models.
Run the full RDM set on a fuller-outlined twinzer egg or mid-length with matching canard boxes — it drives and holds through turns for surfers drawing lines and leaning into rail rather than flicking the tail. If you want a snappier twinzer for a shorter board, the DST Twinzer is the move, and if you want traditional keel-twin drive without canards, go Gephart 70/30 Keels.
Derrick Disney's primary twinzer set, manufactured by True Ames in solid fiberglass with FCS- and Futures-compatible bases. The set pairs two wide-base rear twins, whose foil runs into a fuller drop tip, with a low-profile double-foiled canard set at a fixed cant; the canard is offered in multiple angles. It was designed around Disney's fuller-outlined Midzr, Roe and Egg board models and is meant for boards with matching canard boxes.
Mentioned in the review — Derrick Disney DST Twinzer · Gephart 70/30 Keels · Gephart 2 Keels — not something we carry.