Il carrello è vuoto

Rich Pavel’s canards, FCS compatible solid fiberglass in smoke — the lead fins of the Pavel twinzer, sold as a pair.A twinzer runs four fins, but not as a quad: each main fin gets a small canard set just ahead of and outside it.
I canard di Rich Pavel, in fibra di vetro piena compatibile FCS, colore smoke — le pinne di testa del twinzer Pavel, venduti in coppia.
Un twinzer usa quattro pinne, ma non come un quad: ogni pinna principale ha un piccolo canard montato appena davanti e all'esterno. Il canard genera un vortice sopra la pinna principale, che così tiene con un angolo più ripido di quanto farebbe altrimenti. I canard si vendono in coppia; le pinne posteriori si comprano a parte o nei set twinzer.
Questo template
I canard Pavel sono relativamente dritti, il che privilegia la tenuta rispetto al release — il canard da scegliere se il motivo per cui vuoi un twinzer è che il tuo twin molla troppo presto. 2.91" di altezza su una base di 2.70", negli stessi tre angoli di cant del resto della gamma.
Specifiche
Configurazione
Canard — coppia
Sistema pinne
Compatibile FCS
Costruzione
Fibra di vetro piena, foil interno piatto
Altezza
2.91"
Base
2.70"
Area
5.97 sq in
Cant
0°, 4° o 9°
Colore
Smoke
Designer
Rich Pavel
Prodotti da
True Ames, Santa Barbara, California
Paired with twin mains, the canards add tight pivoting turns, more bite, and a high degree of sensitivity — a Twinzer's bite without the drag of a full quad.
Use these as the front pair on a dedicated Twinzer with the rear fins it was built around, where you want more bite and sensitivity than a plain twin. Do not drop them into random side-bite boxes hoping for improvement — they are specific to Twinzer placement, and if your board is a straight twin that needs more hold, a McCallum Twin or a nubster-style trailer is the better route.
The Pavel Canards are small, upright front fins for a Twinzer setup, designed by Rich Pavel and made by True Ames in solid fiberglass with FCS-compatible bases. They have a flat inside foil and run forward of and outboard of a twin's main fins, where they break water tension ahead of the trailing fin. They are not a standalone setup and require a board built with canard boxes.
Mentioned in the review — McCallum Twin — not something we carry.