Votre panier est vide

Wayne Rich's trailer fin, FCS compatible solid fiberglass, in smoke or red.
Le trailer de Wayne Rich, compatible FCS en fibre de verre pleine, en smoke ou red.
Le trailer, c'est la petite dérive qui transforme un twin en 2+1 — ou qui ajoute un peu d'accroche de tail à une simple dérive. Elle n'est pas là pour diriger ; elle est là pour empêcher le tail de partir plus loin que vous ne l'avez demandé.
Celle-ci
Le trailer de Rich est petit et à fort rake — il stabilise le tail d'un twin au milieu du turn sans ajouter la rigidité en ligne droite qu'apporte un trailer plus haut.
Spécifications
Configuration
Dérive unique
Système de dérives
Compatible FCS
Construction
Fibre de verre pleine
Base
2.96"
Profondeur
2.58"
Coloris
smoke, red
Conception
Wayne Rich
Fabriquée par
True Ames, Santa Barbara CA
Dropping it in adds tail hold without converting the board into a thruster, keeping most of the twin character intact.
Buy it if you ride a twin with a trailer box and the tail lets go in punchier surf: it plants the tail while keeping most of the twin's drift and speed, and pairs naturally with the Wayne Rich Twins. Without a trailer box, or if you really want a full thruster, this is not the fin.
The Wayne Rich Trailer is a small center trailer fin designed by shaper Wayne Rich and foiled by True Ames in FCS-compatible solid fiberglass. It is a low, small template in the nubster style that mounts in a trailer box at the centerline behind a twin pair. Rich designed it to pair with his own twin and keel sets, including the Wayne Rich Twins.
The twin set this trailer was designed to slot behind for the matched setup.
Mentioned as another loose twin set the trailer can tighten up.
A full thruster set is the different direction if you want a bigger jump toward three-fin feel.
