Il carrello è vuoto

Wayne Rich 3.4" side bite pair in solid fiberglass, FCS-compatible — the small outside fins that turn a single-fin board into a 2+1.
Coppia di side bite Wayne Rich da 3.4" in fibra di vetro piena, compatibile FCS — le piccole pinne esterne che trasformano una tavola single fin in una 2+1.
Le side bite trasformano una tavola single fin in una 2+1: la pinna centrale continua a fare la guida, e le due piccole aggiungono tenuta in curva e spinta in uscita dal bottom. In cambio si perde un po' di quella sensazione sciolta e pivotante che un single fin ha da solo, ed è per questo che la misura è la vera decisione.
Questa misura
Con i loro 3.4" sono una side bite piccola: quanto basta a calmare la coda senza impegnare la tavola in una sensazione da thruster.
Costruzione
La fibra di vetro piena è la più rigida e pesante delle due costruzioni: meno flex, drive più diretto.
Il template
Rich disegna una side bite con più rake del template di casa, e questo scambia un po' di mordente immediato con un arco più lungo e più morbido.
Specifiche
Configurazione
Side bite — coppia
Sistema pinne
Compatibile FCS
Costruzione
Fibra di vetro piena
Base
3.54"
Profondità
3.44"
Colori
smoke, red
Designer
Wayne Rich
Produzione
True Ames, Santa Barbara CA
Slightly more upright than a standard side bite, with a thinner tip and relief through the trailing edge that keeps the turn precise rather than draggy -- the smaller area makes this the looser pick for lighter riders and smaller boards.
The looser side of a performance 2+1: rail grip and lift for smaller riders and smaller boards, run with a dropped-down center fin and matched naturally to the Power Tilt center. Bigger riders or bigger waves want the 4.0" version's harder lock-in instead.
The Wayne Rich Side Bites 3.4" are an FCS-compatible pair in solid fiberglass, designed by Wayne Rich to complement his Power Tilt center fin in a 2+1 setup, though they work with most center skegs. The template runs slightly more upright than a standard side bite, with a thinner tip and relief through the trailing edge. True Ames also offers the template in a larger 4.0" size and in a Futures-compatible version. The 3.4" size is intended for smaller riders and smaller boards.
