カートは空です

Fin system: FCS / Futures Compatible.The Lovelace FM Twinzer set was specifically designed to be paired with Ryan's FM board model.
Lovelace FM Twinzer セットは、Ryan の FM ボードモデルに合わせて専用に設計されました。フロントのナブはインサイドがフラットなシングルフォイル、リアのツインはダブルの 50/50 フォイルです。適したボードと組み合わせれば、豊かなスピードとドライブに加え、しっかりレールを入れたカービングと、滑らかな弧を描くターンが可能になる独自のセットです。
設計についての Ryan のコメントをもう少しご紹介します。
「このフィンは、私の FM サーフボードのかなり変わったフィン位置に合わせて専用に設計しました。ミッドレングスではレールから 2" 以上離れ、ほぼ平行に配置されます。リーディングフィンを付けるかどうかは、乗り手の好み次第です。テンプレート全体に加えてダブルフォイルであることから、狙いはかなりはっきりとミッドレングスのツインに向いており、つながりのある弧を描くカービングを引き出します。このテンプレートは、一般的なツインよりも表面積がかなり大きくなっています。そのため、一緒に設計した『FM』モデル以外のボードで使う場合は、ミッドレングスのツイン、体格のあるサーファーが乗る 6' クラスのツイン、あるいはレールにしっかり荷重をかけてドライブを溜めるのが好きなサーファーに向いていると思います。なお、Piggyback キールは非常に近いテンプレートで、サイズが小さいぶん『通常』サイズのツインにより適しています。」
It holds through carves like a quad but keeps the freedom and squirt of a twin -- somewhere between the two, with more bite than a plain twin and less track than a locked-in quad.
This is the matched set for an FM or a similar off-the-rail, near-parallel mid-length twin, where it draws long, connected, arcing carves with real hold. It pays back juicier waves more than small mush, and if your boxes are in a conventional twin position, a standard twin set will sit better.
The Lovelace FM Twinzer is a four-fin set Ryan Lovelace designed for his FM mid-length: a pair of double-foiled rear twins plus a pair of small single-foiled front canards with flat inside faces, made by True Ames in solid fiberglass with Futures-compatible trailers and FCS-compatible leaders. The template was drawn for the FM's box placement, more than two inches off the rail on mid-lengths and close to parallel, with the canards seated forward and outboard of the twins.
Pull the canards and run the rears alone for the Lovelace Twin feel -- looser and faster down the line.
The more locked-in alternative if you want planted, channeled Bonzer-style drive.
Suggested, along with the Lovelace Twin, for boards with more conventional twin box placement.
