カートは空です

Todd Pinder's 9.5" longboard single fin: an upright pivot outline with area taken back out of it.9.5", solid fiberglass, in champagne, for a longboard box.
Todd Pinder による 9.5" のロングボード用シングルフィンです。立ち気味のピボット系の輪郭から、面積を削り戻した一本です。
9.5"、ソリッドファイバーグラス製、カラーはシャンパン、ロングボードボックス用です。True Ames は Todd Pinder の長く使われてきたテンプレートをラインに加えており、その最初の一本がこの Standard です。ピボットフィンらしく立っていながら、全体の面積は抑えられています。この組み合わせこそが狙いです。ノーズに立てるだけのフィンがテールの下にあり、それでいて、セクションが立ち上がったときに板が回らなくなるほど多くはありません。
どう感じられるか
立った輪郭はフィンの荷重を後ろ足の真下に置くため、板は長い弧ではなくその場で回り、乗り手が前へ歩く間もテールを押さえます。面積を削れば、抵抗もいっしょに減ります。ノーズで板を落ち着かせる働きは残したまま、面積の大きいピボットフィンより回りは速く、際どいセクションでの感触も豊かです。
どんな方に向くか
トリムとノーズライドのために乗るトラディショナルなロングボードに。波が求めたときの強いターンも手放したくない方に向きます。ノーズは支えるものの回りにくい面積の大きいピボット系のテンプレートと、軽く回るかわりに踏む場所の少ない面積の小さいパフォーマンス系フィンとの、中間に位置します。
仕様
構成
シングルフィン
フィンシステム
シングル/ロングボードボックス
構造
ソリッドファイバーグラス
高さ
9.5"
カラー
シャンパン
デザイナー
Todd Pinder
製造
True Ames、カリフォルニア州サンタバーバラ
A more upright design, but unlike other pivot fins the overall fin area has been reduced -- aimed at traditional longboard surfing and stability on the nose, while still allowing for hard turns and sensitivity in critical sections.
For the log rider who wants planted nose time without the board tracking like it is on rails -- it pivots tight and stays responsive enough to snap a section. If you want long, drawn-out flowing carves instead, a raked flex fin like the Norm Flex draws them better.
The Pinder Single is a longboard single fin designed by Todd Pinder and made by True Ames in solid fiberglass, in one size at 9.5". The template is more upright than a classic raked pivot fin but with reduced overall area. It is intended for noseriders and all-around traditional logs.
Mentioned in the review — Norm Flex · McTavish Involvement — not something we carry.