カートは空です

A 4.0" side bite pair in solid fiberglass, Futures-compatible — the small outside fins that turn a single-fin board into a 2+1.
4.0" のサイドバイト2本セット、ソリッドファイバーグラス、Futures 対応。シングルフィンのボードを 2+1 にする、小さなアウトサイドフィンです。
サイドバイトはシングルフィンのボードを 2+1 に変えます。舵を取るのはあくまでセンターフィンで、2本の小さなフィンがターン中の粘りと、ボトムからのドライブを加えます。引き換えに、シングルフィン単体が持つルースでピボットの効いた感触は多少失われます。だからこそ、サイズ選びが本当の判断どころになります。
このサイズについて
4.0" は3つのなかで最もフィンらしいサイズです。粘りが最も強く、ドライブも最も大きく、ボードの回り方への影響も最も大きくなります。大きめのボード、あるいは本物の波でラインを保つためのサイズです。
構造
ソリッドファイバーグラスは2つの構造のうち硬く重いほうで、しなりは少なく、よりダイレクトなドライブをもたらします。
スペック
構成
サイドバイト — 2本1組
フィンシステム
Futures 対応
構造
ソリッドファイバーグラス
Base
3.9"
Depth
4"
サイズ
4.0"
カラー
スモーク、クリア、レッド、ブルー
製造
True Ames, Santa Barbara CA
The 4.0 sits at the aggressive end of the side bite range: more surface than the 3.7 most longboarders default to, which means stronger rail-to-rail hold and more drive through a turn.
Reach for the 4.0 on a bigger log or performance longboard in steeper, more powerful surf when you want maximum rail grip and a thruster-leaning 2+1 — and remember to drop your center fin so total area stays balanced. If you only want a hint of extra grip without changing the single-fin character, this is too much fin; go smaller.
The Side Bite 4.0 is the 4.0" size at the large end of True Ames' standard side bite line, made in solid fiberglass with Futures bases and sold as a pair. It is intended for longboard and mid-length 2+1 setups, run with a dropped-down center fin to keep total fin area balanced.
The 4.0 carries more surface than the 3.7 most longboarders default to, adding stronger hold and drive.
The review contrasts the 4.0 with the small, minimal-rake Skip Frye Side Bites, which add just a touch of stability while preserving single-fin character.
The review suggests the smaller 3.25 for a hint of extra grip without changing the single-fin feel.
