カートは空です

Wayne Rich's trailer fin, FCS compatible solid fiberglass, in smoke or red.
Wayne Rich のトレーラーフィン、FCS 対応のソリッドファイバーグラス。カラーはスモークまたはレッド。
トレーラーとは、ツインを 2+1 に変える小さなフィンです。あるいは、シングルフィンにテールの粘りを少し足すためのものでもあります。舵を取るためのものではなく、テールが求めた以上に滑り出るのを止めるためのものです。
この一本
Rich のトレーラーは小ぶりで、後方へ寝かせてあります。背の高いトレーラーが加えてしまう直進方向の硬さを伴うことなく、ターンの中盤でツインのテールを落ち着かせます。
スペック
構成
シングルフィン
フィンシステム
FCS 対応
構造
ソリッドファイバーグラス
Base
2.96"
Depth
2.58"
カラー
スモーク、レッド
デザイン
Wayne Rich
製造
True Ames, Santa Barbara CA
Dropping it in adds tail hold without converting the board into a thruster, keeping most of the twin character intact.
Buy it if you ride a twin with a trailer box and the tail lets go in punchier surf: it plants the tail while keeping most of the twin's drift and speed, and pairs naturally with the Wayne Rich Twins. Without a trailer box, or if you really want a full thruster, this is not the fin.
The Wayne Rich Trailer is a small center trailer fin designed by shaper Wayne Rich and foiled by True Ames in FCS-compatible solid fiberglass. It is a low, small template in the nubster style that mounts in a trailer box at the centerline behind a twin pair. Rich designed it to pair with his own twin and keel sets, including the Wayne Rich Twins.
The twin set this trailer was designed to slot behind for the matched setup.
Mentioned as another loose twin set the trailer can tighten up.
A full thruster set is the different direction if you want a bigger jump toward three-fin feel.
