カートは空です

Wayne Rich 3.4" side bite pair in solid fiberglass, FCS-compatible — the small outside fins that turn a single-fin board into a 2+1.
Wayne Rich 3.4" のサイドバイト2本セット、ソリッドファイバーグラス、FCS 対応。シングルフィンのボードを 2+1 にする、小さなアウトサイドフィンです。
サイドバイトはシングルフィンのボードを 2+1 に変えます。舵を取るのはあくまでセンターフィンで、2本の小さなフィンがターン中の粘りと、ボトムからのドライブを加えます。引き換えに、シングルフィン単体が持つルースでピボットの効いた感触は多少失われます。だからこそ、サイズ選びが本当の判断どころになります。
このサイズについて
3.4" は小ぶりなサイドバイトです。ボードをスラスターの感触に振り切ることなく、テールを落ち着かせるだけの効きがあります。
構造
ソリッドファイバーグラスは2つの構造のうち硬く重いほうで、しなりは少なく、よりダイレクトなドライブをもたらします。
テンプレートについて
Rich が描くサイドバイトは、当社標準のテンプレートよりレイクが大きく、即座の噛みつきをわずかに譲るかわりに、より長く滑らかな弧を生みます。
スペック
構成
サイドバイト — 2本1組
フィンシステム
FCS 対応
構造
ソリッドファイバーグラス
Base
3.54"
Depth
3.44"
カラー
スモーク、レッド
デザイン
Wayne Rich
製造
True Ames, Santa Barbara CA
Slightly more upright than a standard side bite, with a thinner tip and relief through the trailing edge that keeps the turn precise rather than draggy -- the smaller area makes this the looser pick for lighter riders and smaller boards.
The looser side of a performance 2+1: rail grip and lift for smaller riders and smaller boards, run with a dropped-down center fin and matched naturally to the Power Tilt center. Bigger riders or bigger waves want the 4.0" version's harder lock-in instead.
The Wayne Rich Side Bites 3.4" are an FCS-compatible pair in solid fiberglass, designed by Wayne Rich to complement his Power Tilt center fin in a 2+1 setup, though they work with most center skegs. The template runs slightly more upright than a standard side bite, with a thinner tip and relief through the trailing edge. True Ames also offers the template in a larger 4.0" size and in a Futures-compatible version. The 3.4" size is intended for smaller riders and smaller boards.
