カートは空です

Renny Yater’s pivot fin, in three heights — upright, deep, and cut to plant the tail.A pivot fin is the upright end of the longboard spectrum: little rake, most of the area sitting under the board rather than trailing behind it, so the board turns around the fin instead of arcing away from it.
Renny Yater のピボットフィンを、三つの高さで。立ち気味で、深さがあり、テールを固定するために描かれたアウトラインです。
ピボットフィンはロングボードフィンの中でも立ち気味の側にあり、レイクが小さく、面積の多くが後方に流れるのではなくボードの真下に収まります。そのためボードは、弧を描いて離れていくのではなくフィンを軸に回ります。Yater のものはそのテンプレートのクラシックな形で、リリースよりホールド、ルースさより落ち着きに寄っています。ソリッドファイバーグラス製で、グロスとポリッシュ仕上げ。サイズは 8"、8.5"、9" です。
どう感じられるか
ノーズライドをまとめ上げるのは、深さと立ったトレーリングエッジです。前に歩いていく間もテールは固定されたままで、ターンは弧を描くのではなく、定まった一点を軸にボードを押し回すことで生まれます。一方で、レイクの大きいフィンのようにダウン・ザ・ラインへ伸びていくことはなく、テールを滑らせることもありません。
どんな方に向くか
ノーズでの時間を目当てに乗るトラディショナルなログ、そしてルースさよりもテールが固定されることを重んじるロングボードに。三つの高さはいずれも同じテンプレートで、深さが増すほどホールドが増します。
仕様
構成
シングルフィン
フィンシステム
シングル/ロングボードボックス
構造
ソリッドファイバーグラス、グロスとポリッシュ仕上げ
サイズ
8"、8.5"、9.0"
カラー
ブラック
デザイナー
Reynolds "Renny" Yater
製造
True Ames、カリフォルニア州サンタバーバラ
これではない場合
Yater のテンプレートはこのほかに二つあります。Yater Classic と Yater Spoon で、ピボットのアウトラインに決める前に比べてみる価値があります。
A low-rake, high-hold template in the classic Yater mold: the upright profile and generous area plant the tail and hold it down so the nose lifts, and the low rake makes the turn a tight pivot off the tail rather than a sweeping carve.
Put this on a classic log or noserider when planted hold and tight pivot turns matter more than drive down the line; walk to the nose and the tail stays planted, step back and it pivots around tight. If you want the same nose authority with more rake and drive off the bottom, the Wayne Rich Harmonic '67 is the more driving of the two.
Renny Yater's upright pivot single fin, made by True Ames in solid fiberglass with a gloss and polish finish. It is stocked in three sizes: 8, 8.5 and 9 inches. The template is low-rake with an upright profile and generous area, and it is intended for classic logs and noseriders.
Mentioned in the review — Wayne Rich Harmonic '67 · Yater Spoon — not something we carry.