Your cart is empty

Mick Mackie's single fin series: a wide base for drive, in two sizes that trade tip area for release, for mid-lengths, speed shapes and longboards.The Smooth Glide is a series rather than one template.
Mick Mackie's single fin series: a wide base for drive, in two sizes that trade tip area for release, for mid-lengths, speed shapes and longboards.
The Smooth Glide is a series rather than one template. Both sizes have a wide base, but the 9.375" runs quickly into a narrow tip while the 8.375" holds more area through the centre and the tip. Solid fiberglass, longboard box, in clear and yellow. Mackie drew it for surfers who want a single fin with plenty of drive under them and still expect to put the board on rail hard and change direction in the pocket.
The wide base is where the drive comes from: push on it and the board goes forward rather than sideways. The 9.375", narrowing quickly into the tip, lets the back of the fin release, so a cutback comes round tight. The 8.375", holding area through the centre and tip, keeps its grip longer and asks for a slightly longer arc. Both stay settled enough to trim.
Longer mid-lengths, speed shapes and a range of longboards. Take the 9.375" for more fin under a bigger board with quicker release out of the tip, and the 8.375" if you want the extra hold through the tip on a shorter or looser board.
He shapes for drive and hold first so a board can draw smooth lines, then adds rake to a smaller tip so the turn transfers smoothly with some performance on tap.
Ample drive while staying easy to pivot and run through hard cutbacks β the wide base is the engine, and the tapered tip keeps it from feeling locked.
Pick the Smooth Glide for a longer mid-length, speed shape, or longboard single when you want drive that still pivots β the 9.375 for drawn-out lines, the 8.375 when you want the drive carried higher into the tip for tighter response. If you want more aggressive long-arc drive, go v.Bowls; for classic soft-wave feel, the 4A.
The Mackie Smooth Glide is a single fin designed by Mick Mackie and made by True Ames. It comes in two sizes with different area distributions: the 9.375" carries a wide base into a quickly tapering narrow tip, while the 8.375" holds more area through the center and tip. It is intended for longer mid-lengths, speed shapes, and longboards ridden as single fins.
Mentioned in the review β Lovelace v.Bowls Β· Greenough 4A β not something we carry.