カートは空です

A 3.7" side bite pair in solid fiberglass, FCS-compatible — the small outside fins that turn a single-fin board into a 2+1.
3.7" のサイドバイト2本セット、ソリッドファイバーグラス、FCS 対応。シングルフィンのボードを 2+1 にする、小さなアウトサイドフィンです。
サイドバイトはシングルフィンのボードを 2+1 に変えます。舵を取るのはあくまでセンターフィンで、2本の小さなフィンがターン中の粘りと、ボトムからのドライブを加えます。引き換えに、シングルフィン単体が持つルースでピボットの効いた感触は多少失われます。だからこそ、サイズ選びが本当の判断どころになります。
このサイズについて
3.7" は中間に位置し、多くの方が最終的に選ぶサイズです。3.25" よりも粘りとドライブがはっきりと増しますが、テールを固定してしまうほどではありません。
構造
ソリッドファイバーグラスは2つの構造のうち硬く重いほうで、しなりは少なく、よりダイレクトなドライブをもたらします。
スペック
構成
サイドバイト — 2本1組
フィンシステム
FCS 対応
構造
ソリッドファイバーグラス
サイズ
3.7"
カラー
スモーク、クリア、レッド、ブルー
製造
True Ames, Santa Barbara CA
The most popular side bite size for a longboard 2+1, adding real hold and drive without overpowering the center fin.
On a full log you surf with real turns, this pair lets you push hard off the tail without the board washing out, catching you where a single fin would slide. Pair it with a 7" to 7.5" cutaway-style center fin; if you're setting up a mid-length and want to keep single-fin glide, the smaller 3.25 is the better tool.
The True Ames Side Bite 3.7 is a 3.70-inch-tall side bite pair in solid fiberglass with FCS-compatible bases, intended for longboard 2+1 setups on boards in the 9'0" to 9'6" range. True Ames recommends pairing it with a 7-inch to 7.5-inch center fin. The same template is also stocked in lighter Hexcore construction and with Futures bases, and a smaller 3.25-inch size is offered for mid-lengths.
