カートは空です

A 3.7" side bite pair in solid fiberglass, Futures-compatible — the small outside fins that turn a single-fin board into a 2+1.
3.7" のサイドバイト2本セット、ソリッドファイバーグラス、Futures 対応。シングルフィンのボードを 2+1 にする、小さなアウトサイドフィンです。
サイドバイトはシングルフィンのボードを 2+1 に変えます。舵を取るのはあくまでセンターフィンで、2本の小さなフィンがターン中の粘りと、ボトムからのドライブを加えます。引き換えに、シングルフィン単体が持つルースでピボットの効いた感触は多少失われます。だからこそ、サイズ選びが本当の判断どころになります。
このサイズについて
3.7" は中間に位置し、多くの方が最終的に選ぶサイズです。3.25" よりも粘りとドライブがはっきりと増しますが、テールを固定してしまうほどではありません。
構造
ソリッドファイバーグラスは2つの構造のうち硬く重いほうで、しなりは少なく、よりダイレクトなドライブをもたらします。
スペック
構成
サイドバイト — 2本1組
フィンシステム
Futures 対応
構造
ソリッドファイバーグラス
サイズ
3.7"
カラー
スモーク、クリア、レッド、ブルー
製造
True Ames, Santa Barbara CA
The intent is hold without character change: the fin wakes up on rail and otherwise stays out of the center fin's way. It is the size True Ames flags as its most recommended for longboard 2+1 setups.
The safe middle of the side bite range: pair them with a 7 to 7.5 inch cutaway center on a 9-foot board and let them plant the tail through turns a pure single would wash out of. Size down to the 3.25 to keep a mid-length's single-fin glide intact, or up to the 4.0 for steep, overhead surf.
A pair of True Ames side bite fins in the 3.7 inch size, Futures-compatible solid fiberglass, sold as a pair. The True Ames side bite range runs from 2.6 inches up to 4.35 inches, and 3.7 is the size True Ames flags as its most recommended for longboard 2+1 setups. The template is upright with light rake, designed to pair with a center fin around 7 to 7.5 inches on longboards and performance logs.
The review says the 4.0 carries noticeably more hold and release for a more aggressive, thruster-adjacent feel in bigger surf.
For a fuller mid-length where you want the single-fin glide left intact, the review says the 3.25 keeps things subtler.
